Combined All Part Of Solar Power Regulator

Objective:

1. Install the combined circuit into the casing step by step
2. To make the finishing process

Process:

• ·         Make a hole into the casing by drill it for to place a push button, solar and circuit design
•       Pair the stand to the casing
•       Tide it and put the circuit to the stand and tide it again
• ·         Install the combined circuit into the casing.
• ·         After install the circuit label all the circuit correctly.
• ·         Double check the combined part and tight it

 

Result/analysis:

·         We have managed to combine the combined circuit into casing

·         All the procedure have been done step by step.

Conclusion:

For this week 13, we have manage install the combined circuit into casing. We have combined it and arrange it properly. All process done and finis.

 Make Hole

Stand For Circuit

Circuit Done

 

Base For the Solar Panel

 Finishing